The DA913X-A product family with fully integrated FETs boasts high efficiency and small footprints, requiring few external components
LONDON, UK / ACCESSWIRE / August 31, 2020 / Dialog Semiconductor plc (XETRA:DLG), a leading provider of battery management, AC/DC power conversion, Wi-Fi(R) and Bluetooth(R) low energy and Industrial ICs, today announces the DA913X-A product family, a new line of highly efficient, high-current, automotive-grade, step-down DC-DC (Buck) converters.
The highly integrated DA913X-A devices require fewer external components than competing solutions, enabling a low system BoM cost and a reduced solution footprint. The devices operate at efficiency levels above 90%, reducing the thermal design challenges for powering high-current rails in a wide range of automotive systems, including infotainment, navigation, telemetry, and Advanced Driver Assistance Systems (ADAS).
The DA913X-A family is comprised of three devices configured as single- or dual-output buck converters. The DA9130-A operates as a single-channel, dual-phase buck converter, delivering up to a 10 A output current. The DA9131-A integrates two single-phase buck converters, each delivering up to 5 A output current. The DA9132-A also integrates two single-phase buck converters, each delivering up to 3 A output current. All devices have an input voltage range of 2.5 V to 5.5 V and an output voltage range of 0.3 V to 1.9 V, making them suitable for a wide variety of low-voltage systems. Output voltages above 1.9V are supported with an external resistor divider.
“Dialog continues to introduce new PMIC solutions that meet the increasing power and thermal efficiency requirements of high-performance, in-cabin automotive electronics systems,” said Tom Sandoval, Senior Vice President, GM Automotive Business Segment, Dialog Semiconductor. “Automotive system developers can rely on Dialog for the leading, cost-efficient, small-form factor, power solutions.”
The DA913X-A products include several key features to meet the needs of today’s complex automotive electronics systems:
- Remote sensing guarantees the highest accuracy and supports multiple PCB routing scenarios without loss of performance.
- Fully programmable soft start limits the in-rush current from the input to give a slope-controlled output voltage.
- Dynamic voltage control (DVC) enables adaptive adjustment of the supply voltage dependent on the load. This increases efficiency when the downstream circuitry enters low power or idle mode, resulting in power savings.
- Configurable GPIOs support a range of features including I2C, DVC and Power Good indicator.
- Optimized BoM cost and footprint: Each output requires a very small inductor and capacitor.
The DA9130X-A devices are AEC-Q100 Grade 2 qualified and are available in a 3.3mm x 4.8mm a 24-pin FC-QFN wettable flank package. Industrial/commercial grade versions are also available.
For more information on this new product family, please visit pages for the DA9132, DA9131, DA9131-A, DA9130, DA9130-A and DA9132-A.
ENDS
NOTES:
Dialog, and the Dialog logo are trademarks of Dialog Semiconductor plc or its subsidiaries. All other product or service names are the property of their respective owners. (c) Copyright 2020 Dialog Semiconductor. All rights reserved.
Media Contact:
Mark Tyndall
SVP Corporate Development & Strategy
Dialog Semiconductor
Phone: +1 (408) 845 8520
mark.tyndall@diasemi.com
Web: www.dialog-semiconductor.com
Twitter: @DialogSemi
About Dialog Semiconductor
Dialog Semiconductor is a leading provider of standard and custom integrated circuits (ICs) that power the Internet of Things and Industry 4.0 applications. Dialog’s proven expertise propels the next generation of today’s devices by providing Battery Management, Bluetooth(R) low energy, Wi-Fi, Flash memory, and Configurable Mixed-signal ICs, improving power efficiency, reducing charge times, while increasing performance and productivity on the go.
Dialog operates a fabless business model and is a socially responsible employer pursuing many programs to benefit the employees, community, other stakeholders and the environment it operates in. With decades of experience and world-class innovation, we help manufacturers get to what’s next. Our passion for innovation and entrepreneurial spirit ensures we remain at the forefront of power efficient semiconductor technology for the IoT, mobile, computing and storage, connected medical, and automotive markets. Dialog is headquartered near London with a global sales, R&D and marketing organization. In 2019, it had approximately $1.4 billion in revenue and is consistently one of the fastest growing European public semiconductor companies. It currently has approximately 2,300 employees worldwide. The company is listed on the Frankfurt (FWB: DLG) stock exchange (Regulated Market, Prime Standard, ISIN GB0059822006).
For more information, visit www.dialog-semiconductor.com.
Contact:
Jose Cano
Director, Investor Relations
jose.cano@diasemi.com
+44(0)1793756961
SOURCE: Dialog Semiconductor Plc via EQS Newswire